(RESOLU) Personnalisation GRUB
Hors ligneKéké Le 07/09/2010 à 20:11 Profil de Kéké Configuration de Kéké

Bonsoir tout le monde!! Ca faisait un moment que je n'etais pas venu ici!!! Preuve que tout va bien quand on est sous linux ;) Sauf qu'aujourd'hui je but un peu ! Je ne trouve aps grand chose sur google voila pour quoi je viens vous voir !! Mon probleme n'en est pas vraiment un en faite mais ca m'ennerve !!!! J'ai creé un splashscreen  mais lorsque je redemarre y'a bien mon image de fond sauf que j'ai un gros rectangle bien noir juste dessus avec le choix des OS .... C'est un peu genant alors qu'il devrait etre transparent !!! snff snff ! Je me dis donc qu'il manque forcement un truc laugh mais quoi ??? Meme avec un splashscreen telechargé sur gnome look j'obtiens le meme resultat !! Grrrrrrrrangry Savez vous comment faire? Je suis sous Debian Lenny avec gnome si ca peut aider !! J'ai posté mon menu.lst pour que ce soit plus precis !En esperant une mini reponse a mon mini probleme smiley !!  Je vous remercie d'avance !

Cordialement

 

 

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-legacy-doc/.
splashimage (hd0,0)/boot/grub/splashimages/freedom.xpm.gz

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default        0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout        5

# Pretty colours
color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title        Windows 95/98/NT/2000
# root        (hd0,0)
# makeactive
# chainloader    +1
#
# title        Linux
# root        (hd0,1)
# kernel    /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sda1 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(single-user) single
# altoptions=(single-user mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title        Debian GNU/Linux, kernel 2.6.26-2-686
root        (hd0,0)
kernel        /boot/vmlinuz-2.6.26-2-686 root=/dev/sda1 ro quiet
initrd        /boot/initrd.img-2.6.26-2-686

title        Debian GNU/Linux, kernel 2.6.26-2-686 (single-user mode)
root        (hd0,0)
kernel        /boot/vmlinuz-2.6.26-2-686 root=/dev/sda1 ro single
initrd        /boot/initrd.img-2.6.26-2-686

### END DEBIAN AUTOMAGIC KERNELS LIST

Hors ligneKéké Le 09/09/2010 à 15:20 Profil de Kéké Configuration de Kéké

Bonjour a toutes et tous !! Bon j'ai trouve comment arranger mon pti soucis! Je l'avais deja essayé mais en re faisant la meme manip ca a marché! Allez savoir pourquoi ! bref je vous explique pour ceux qui, un jour ont le meme "probleme" !  voici mon nouveau menu.lst !

 

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-legacy-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default        0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout        5

# Pretty colours
splashimage (hd0,0)/boot/grub/splashimages/anarchy.xpm.gz
color white/black cyan/black

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title        Windows 95/98/NT/2000
# root        (hd0,0)
# makeactive
# chainloader    +1
#
# title        Linux
# root        (hd0,1)
# kernel    /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sda1 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(single-user) single
# altoptions=(single-user mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title        Debian GNU/Linux, kernel 2.6.26-2-686
root        (hd0,0)
kernel        /boot/vmlinuz-2.6.26-2-686 root=/dev/sda1 ro quiet
initrd        /boot/initrd.img-2.6.26-2-686

title        Debian GNU/Linux, kernel 2.6.26-2-686 (single-user mode)
root        (hd0,0)
kernel        /boot/vmlinuz-2.6.26-2-686 root=/dev/sda1 ro single
initrd        /boot/initrd.img-2.6.26-2-686

### END DEBIAN AUTOMAGIC KERNELS LIST

 

J'ai seulement mis mon splashimage sous #Pretty colours et modifier les couleurs comme ceci

# Pretty colours
splashimage (hd0,0)/boot/grub/splashimages/anarchy.xpm.gz
color white/black cyan/black
 

Le black veut en faite dire transparent pour grub ! J'avais deja essayé sans succes mais la ca fonctionne donc c'est cool ! Voilou ! A bientot  et merci de m'avoir lu !

 

Cordialement

Kevin

Hors ligneMasansan2921 Le 18/02/2011 à 19:19 Profil de Masansan2921 Configuration de Masansan2921

Merci beaucoup , c'est en forgeant qu'on devient forgeron.

--
Il n'est jamais trot tard pour apprendre.
Vous avez résolu votre problème avec VIC ? Faites-le savoir sur les réseaux sociaux !
Vulgarisation-informatique.com
Cours en informatique & tutoriels